Audi A3 8V RS3 2.5L TFSI 367hpExpected figures per programme
| Programme | Power (ps) | Torque (Nm) |
|---|---|---|
| Stock | 367 | 465 |
| Stage 1 | 410+43 · +12% | 600+135 · +29% |
| Stage 2 | 420+53 · +14% | 620+155 · +33% |
| Stage 3 | 520+153 · +42% | 680+215 · +46% |
* Typical expected values (±5%) for a healthy, standard car. Final figures are measured on our own 4WD Dimsport dyno and you take home the before/after graph.
Illustrative curve · Stage 1
//Our work
Audi A3 8V we measured on our dyno
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1+
STAGE 1
STAGE 1
STAGE 1
STAGE 1Frequently asked
How much power will the Audi A3 RS3 2.5 TFSI 367hp make after a remap?
With Stage 1 the Audi A3 8V (2012 – 2016) RS3 2.5 TFSI 367hp is expected to reach about 410 ps and 600 Nm of torque, up from 367 ps / 465 Nm stock. Final figures depend on the car's condition and are measured on our dyno after mapping.
Where is the remap done?
At the Microchips Tuning workshop, Dimitsanas 6, 183 46 Moschato (Athens), on our own 4WD Dimsport dyno. The calibration is written for your specific car, with a before/after graph.
Can it be returned to stock?
Yes. We keep the original ECU file, so the car can always go back to the factory calibration.
Other engines of this generation
1.6 TDI 105hpDiesel1.6 TDI 110hpDiesel2.0 TDI 110hpDiesel2.0 TDI 136hpDiesel2.0 TDI 150hpDiesel2.0 TDI 184hpDieselE-Tron 1.4 TFSI PHEV 204hpPetrol1.2 TFSI 110hpPetrol1.2 TSI 105hpPetrol1.4 TFSI 122hpPetrol1.4 TFSI 125hpPetrol1.4 TFSI COD 140hpPetrol1.4 TFSI COD 150hpPetrol1.8 TFSI 180hpPetrol2.0 TFSI 220hpPetrolG-Tron 1.4 TFSI 110hpPetrolS3 2.0 TFSI 300hpPetrol