Audi A4 B7 RS4 4.2L V8 420hpExpected figures per programme
| Programme | Power (ps) | Torque (Nm) |
|---|---|---|
| Stock | 420 | 430 |
| Stage 1 | 440+20 · +5% | 455+25 · +6% |
| Stage 2 | 455+35 · +8% | 470+40 · +9% |
* Typical expected values (±5%) for a healthy, standard car. Final figures are measured on our own 4WD Dimsport dyno and you take home the before/after graph.
Illustrative curve · Stage 1
//Our work
Audi A4 B7 we measured on our dyno
STAGE 3
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1Frequently asked
How much power will the Audi A4 RS4 4.2 V8 420hp make after a remap?
With Stage 1 the Audi A4 B7 (2004 – 2008) RS4 4.2 V8 420hp is expected to reach about 440 ps and 455 Nm of torque, up from 420 ps / 430 Nm stock. Final figures depend on the car's condition and are measured on our dyno after mapping.
Where is the remap done?
At the Microchips Tuning workshop, Dimitsanas 6, 183 46 Moschato (Athens), on our own 4WD Dimsport dyno. The calibration is written for your specific car, with a before/after graph.
Can it be returned to stock?
Yes. We keep the original ECU file, so the car can always go back to the factory calibration.
Other engines of this generation
1.9 TDi 115hpDiesel2.0 TDi 136hpDiesel2.0 TDi 140hpDiesel2.0 TDi DPF 136hpDiesel2.0 TDi DPF 140hpDiesel2.0 TDi DPF 163hpDiesel2.0 TDi DPF 170hpDiesel2.7 V6 TDi 163hpDiesel2.7 V6 TDi 180hpDiesel3.0 V6 TDi 204hpDiesel3.0 V6 TDi 233hpDiesel1.8T 163hpPetrol2.0 FSi 150hpPetrol2.0 TFSI - DTM edition 220hpPetrol2.0 TFSi 170hpPetrol2.0 TFSi 200hpPetrol3.0 V6 220hpPetrol3.2 V6 255hpPetrolS4 4.2 V8 344hpPetrol