Ford Focus III Facelift 1.6L TDCi 95hpExpected figures per programme
| Programme | Power (ps) | Torque (Nm) |
|---|---|---|
| Stock | 95 | 240 |
| Stage 1 | 120+25 · +26% | 270+30 · +13% |
* Typical expected values (±5%) for a healthy, standard car. Final figures are measured on our own 4WD Dimsport dyno and you take home the before/after graph.
Illustrative curve · Stage 1
//Our work
Ford Focus III we measured on our dyno
STAGE 1
STAGE 1
STAGE 1+
STAGE 2
STAGE 3
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1Frequently asked
How much power will the Ford Focus 1.6 TDCi 95hp make after a remap?
With Stage 1 the Ford Focus III Facelift (2014 – 2018) 1.6 TDCi 95hp is expected to reach about 120 ps and 270 Nm of torque, up from 95 ps / 240 Nm stock. Final figures depend on the car's condition and are measured on our dyno after mapping.
Where is the remap done?
At the Microchips Tuning workshop, Dimitsanas 6, 183 46 Moschato (Athens), on our own 4WD Dimsport dyno. The calibration is written for your specific car, with a before/after graph.
Can it be returned to stock?
Yes. We keep the original ECU file, so the car can always go back to the factory calibration.
Other engines of this generation
1.5 TDCi 105hpDiesel1.5 TDCi 120hpDiesel1.5 TDCi 95hpDiesel1.6 TDCi 115hpDiesel2.0 TDCi 150hpDieselST 2.0 TDCi 185hpDiesel1.0T Ecoboost 100hpPetrol1.0T Ecoboost 125hpPetrol1.5T Ecoboost 150hpPetrol1.5T Ecoboost 182hpPetrol1.6 Ti-VCT 105hpPetrol1.6 Ti-VCT 125hpPetrolRS 2.3T Ecoboost 350hpPetrolST 2.0T Ecoboost 250hpPetrol