Seat Leon II (1P) 2.0L TFSi 200hpExpected figures per programme
| Programme | Power (ps) | Torque (Nm) |
|---|---|---|
| Stock | 200 | 280 |
| Stage 1 | 245+45 · +23% | 380+100 · +36% |
| Stage 2 | 260+60 · +30% | 400+120 · +43% |
| Stage 3 | 300+100 · +50% | 440+160 · +57% |
* Typical expected values (±5%) for a healthy, standard car. Final figures are measured on our own 4WD Dimsport dyno and you take home the before/after graph.
Illustrative curve · Stage 1
//Our work
Seat Leon II (1P) we measured on our dyno
STAGE 1
STAGE 1
STAGE 1+
STAGE 1
STAGE 1
STAGE 2
STAGE 1
STAGE 1
STAGE 1
STAGE 2Frequently asked
How much power will the Seat Leon 2.0 TFSi 200hp make after a remap?
With Stage 1 the Seat Leon II (1P) (2005 – 2012) 2.0 TFSi 200hp is expected to reach about 245 ps and 380 Nm of torque, up from 200 ps / 280 Nm stock. Final figures depend on the car's condition and are measured on our dyno after mapping.
Where is the remap done?
At the Microchips Tuning workshop, Dimitsanas 6, 183 46 Moschato (Athens), on our own 4WD Dimsport dyno. The calibration is written for your specific car, with a before/after graph.
Can it be returned to stock?
Yes. We keep the original ECU file, so the car can always go back to the factory calibration.
Other engines of this generation
1.6 TDi 105hpDiesel1.6 TDi 90hpDiesel1.9 TDi 105hpDiesel1.9 TDi 90hpDiesel2.0 TDi (CR) 136hpDiesel2.0 TDi (CR) 140hpDiesel2.0 TDi (CR) 170hpDiesel2.0 TDi (IP) 140hpDiesel2.0 TDi (PPD) 170hpDiesel1.2 TSi 105hpPetrol1.4 TSi 125hpPetrol1.8 TSi 160hpPetrol2.0 TFSi 185hpPetrolCupra 2.0 TFSi 240hpPetrolCupra R 2.0 TFSi 265hpPetrolFR 2.0 TSi 211hpPetrol