Seat Leon III Facelift (5F) 1.2L TSI 86hpExpected figures per programme
| Programme | Power (ps) | Torque (Nm) |
|---|---|---|
| Stock | 86 | 160 |
| Stage 1 | 130+44 · +51% | 215+55 · +34% |
* Typical expected values (±5%) for a healthy, standard car. Final figures are measured on our own 4WD Dimsport dyno and you take home the before/after graph.
Illustrative curve · Stage 1
//Our work
Seat Leon III we measured on our dyno
STAGE 1
STAGE 1
STAGE 2
STAGE 1+
STAGE 1
STAGE 1
STAGE 1
STAGE 1
STAGE 1+Frequently asked
How much power will the Seat Leon 1.2 TSI 86hp make after a remap?
With Stage 1 the Seat Leon III Facelift (5F) (2016 – 2020) 1.2 TSI 86hp is expected to reach about 130 ps and 215 Nm of torque, up from 86 ps / 160 Nm stock. Final figures depend on the car's condition and are measured on our dyno after mapping.
Where is the remap done?
At the Microchips Tuning workshop, Dimitsanas 6, 183 46 Moschato (Athens), on our own 4WD Dimsport dyno. The calibration is written for your specific car, with a before/after graph.
Can it be returned to stock?
Yes. We keep the original ECU file, so the car can always go back to the factory calibration.
Other engines of this generation
1.6 TDI 115hpDiesel1.6 TDI 90hpDiesel2.0 TDI 150hpDiesel2.0 TDI 184hpDieselST 2.0 TDI 110hpDiesel1.0 TSI 115hpPetrol1.0 TSI 115hpPetrol1.0 TSI 90hpPetrol1.2 TSI 110hpPetrol1.4 TGI 110hpPetrol1.4 TSI 125hpPetrol1.4 TSI ACT 150hpPetrol1.5 TGI 130hpPetrol1.5 TSI 130hpPetrol1.5 TSI 150hpPetrol1.8 TSI 180hpPetrol2.0 TSI 190hpPetrolCupra 2.0 TSI (GPF) 290hpPetrolCupra 2.0 TSI 300hpPetrolCupra R 2.0 TSI 310hpPetrolCupra ST 2.0 TSI (GPF) 300hpPetrol